ServlogUpdated 2026-06-28
Jeep Wrangler Oil Capacity & Type
Compiled & reviewed by Nikolai Tsyrenov · Updated 2026-06-28 · confidence: high
How much oil the Jeep Wrangler takes at an oil change, and which grade.
In short: the Jeep Wrangler takes about 5.0 qt of 0W-20 oil with a new filter (3.6L V6 Pentastar, JL 2018–2024 (JK 6 qt does not apply)). Add gradually and verify on the dipstick.
| Oil capacity (with filter) | 5.0 qt |
|---|---|
| Oil type / viscosity | 0W-20 full synthetic |
| Applies to | 3.6L V6 Pentastar, JL 2018–2024 (JK 6 qt does not apply) |
Tip: fill to about 90% of capacity, run the engine, let it settle, then top up to the dipstick's full mark. Overfilling can be as harmful as running low.
FAQ
How much oil does a Jeep Wrangler take?
The Jeep Wrangler (3.6L V6 Pentastar, JL 2018–2024 (JK 6 qt does not apply)) takes about 5.0 qt of oil with a new filter. Add it gradually and confirm the final level on the dipstick.
What oil type does the Jeep Wrangler use?
0W-20 full synthetic, unless your owner's manual or oil cap specifies otherwise.
Does the oil capacity differ by engine?
Yes — it depends on the exact engine. The figure here is for the 3.6L V6 Pentastar, JL 2018–2024 (JK 6 qt does not apply); other engines, years or hybrid variants can differ, so check your manual.
Jeep Wrangler lug nut torque → · Jeep Wrangler oil change interval → · Full Jeep Wrangler maintenance schedule →
General guidance compiled from manufacturer specifications (Jeep owner's manual / Mopar maintenance schedule) — confidence: high. Always confirm against your Jeep Wrangler owner's manual.
Stop guessing what's due next
Keep every car's service history on schedule — Servlog logs every oil change, rotation and repair, and reminds you when the next service is due.
